Electric Motor Repair Overview
10.11.22
Laser Technologies has optimized the large electric motor repair process from raw material sourcing to final assembly and every step in-between.
Read MoreBlog
Electric Motor Repair Case Study Part 1 - Inspect, Measure, Disassemble
10.11.22
When a damaged motor makes its way to the shop, a few things need to happen before any lamination cutting or rebuild can occur.
Read MoreElectric Motor Repair Case Study Part 2 - Reverse Engineering
10.11.22
After a damaged motor goes through inspection, measurement, and disassembly, it then goes through a reverse engineering process.
Read MoreElectric Motor Repair Case Study Part 3 - Laser Cutting
10.11.22
After drawings are approved for production, our experienced setup operators will set the machine parameters to cut the first lamination.
Read MoreElectric Motor Repair Case Study Part 4 - Stacking & Welding Core
10.11.22
After the laminations have been laser cut, they are brought over to our welding department to be stacked and welded.
Read MoreElectric Motor Repair Case Study Part 5 - Re-inserting Core & Final Inspection
10.11.22
The final step in the electric motor repair process is re-inserting the welded core into the frame followed by a final inspection.
Read MoreThin Gauge Electrical Steel for EV Applications
7.09.21
Overcoming challenges in manufacturing with newer thin gauge electrical steel applications
Read MoreNADCAP Certification
6.10.21
Ensuring quality in annealed materials for Aerospace applications
Read More